Impulse HVG
The Impulse HVG Rehabilitation System from Sterling Medical Technologies delivers the most technically advanced, user-friendly direct current stimulator ever designed.The Impulse HVG includes three preset treatment protocols along with an energy efficient design that extends battery life to levels never before achieved with galvanic stimulators.
Combine these features with many other advancements blended into the device, and you have a unit that sets new standards for sophistication and precision.
Testimonials
Advantages
- Quantitative compliance data and reporting.
- Hands-on MediQuip service.
- Portable and lightweight.
Specifications
- Output configuration
Option 1: One active (red) and one dispersive (black)
Option 2: Two active (red) and one dispersive (black) - Galvanic (HVG)
Pulse Width 5 microseconds at 50% of peak Voltage
Pulse Rate 1-125 pulse pairs / seconds, Adjustable
Output Voltage 0-330 Volts, adjustable into 500 ohm load
Polarity Negative and Positive Pre-set in P1,P2,P3 -- Selectable in P4 Waveform Pulsed galvanic Monophasic exponential spikes
Preset Programs
- Program 1
Nighttime protocol modulates at 150pps continuous for 15 minutes
and then 20 PPS continuous negative polarity for 15 minutes
for a total of 30 minutes of therapy. Then the machine shuts off
for 30 minutes (idle mode), then repeats five more times
for a total of 360 total minutes or six hours of treatment. - Program 2
PRN Chronic protocol at 100 PPS continuous negative polarity for 15
minutes and then 20 PPS continuous negative polarity for 15 minutes
for a total of 30 minutes of treatment. Then the unit thrns itself off. - Program 3
PRN Acute protocol at 100 PPS continuous positive polarity for 15
minutes and then 20 PPS continuous positive polarity for 15 minutes
for a total of 30 minutes on. Then the unit will shut itself off. - Program 4
Adjustable mode.
Power Source 9v DC Battery
Dimensions 4.5" x 2.75" x 0.80"
Weighs 6.3 oz including the battery
Low battery indicator will read LO b
;){kind=link}